Canon Color imageCLASS MF8050Cn 시작 설명서 - 페이지 17
{카테고리_이름} Canon Color imageCLASS MF8050Cn에 대한 시작 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon Color imageCLASS MF8050Cn 29 페이지. Colour laser multifunction
Canon Color imageCLASS MF8050Cn에 대해서도 마찬가지입니다: 시작 설명서 (33 페이지), 사양 (2 페이지)
![Canon Color imageCLASS MF8050Cn 시작 설명서](/uploads/products/server2/1123672/1123672.png)
1
2
Preface
Installing the Machine
Selecting a Method for Connecting the
Machine To a Computer
There are two ways to connect the machine to a computer: Network connection and USB connection, so select the
connection type according to your environment or function.
*
The functions of USB connection and network connection can be used simultaneously.
•
For Network Connection
Network Connection and Configuration
P. 15
Network Connection and Configuration
1.
Connect the LAN cable.
2.
The machine sets the IP address
automatically.
Wait approximately 2 minutes.
If you want to set the IP address manually, see the following.
e-Manual "Setting IPv4 Address"
e-Manual "Setting IPv6 Address"
3
Configuring and Connecting the Fax
Connect the cable.
Make sure that the
green indicator of
the LAN port is on.
4
Connecting to a Computer and
Installing the Drivers
•
For USB Connection
Installing with USB Connection
About the LAN cable
•
The machine does not come with a LAN cable or a hub.
Have cables or a hub ready as needed.
•
Use a Category 5 or higher twisted pair cable for the
LAN.
About obtaining IP address automatically
<DHCP> or <Auto IP> (Bonjour) is enabled in the default setting.
So, the IP address can be obtained automatically when not setting IP address
manually.
•
<DHCP> setting is prioritized over <Auto IP>.
•
If using the machine in Bonjour environment, the IP address can be obtained automatically
without the dedicated device (such as a DHCP server) necessary for the auto settings of IP
address.
If the IP address of the machine is changed
When the machine and computer are on the same subnet, the
connection is maintained.
Appendix
P. 18
If the indicator is not turned on
Check the following.
•
Whether the machine and hub are
connected using a USB cable
•
Whether the power of the machine is
turned ON
15