Astin Trew AT2-2100 Ihr persönliches Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Ihr persönliches Benutzerhandbuch für Verstärken Astin Trew AT2-2100 herunter. Astin Trew AT2-2100 12 Seiten.

A ¼" jack-plug headphone output on the front fascia. Inserting this jack plug will

automatically mute the loudspeaker outputs.

The Loudspeaker output terminals (L/R pairs) will accept banana plugs, spade end

connectors or bare wires.

Power / signal connections and use: Position your AT2-2100 where it will be used,

ensuring you have adequate room to make connections at the rear, or move the

amplifier and/or stand so you have access.

Power supply: Plug in the mains cable supplied but do not switch on at the wall or

the

AT-2100 just yet.

Inputs and outputs: Connect the RCA/XLR input cables from your source

components and loudspeaker cables.

Turn mains power on: Push in the central power on/off switch and the switch will

illuminate. After a 10 second time-delay switch has gone live your AT2-2100 amplifier

will be operational.

Switch to the input-option required: From the left-hand side push switches or

remote control, the option button chosen will be illuminated.

Volume setting: from the rotary control knob on the right side of the front fascia, or

remote controller. The LED indicator around the know offers you a visual indication of

volume setting.

Assuming you have switched on all other associated equipment, you can now play

music through your AT2-2100 amplifier.

'Warm' option setting: switch AT-1 can be switched 'on the fly' to assess whether it

is required or not. This is entirely subjective.

Fault condition warning light: The mute switch illumination will flash on and off

if the amplifier has identified a fault condition or too low a voltage supplied to the

unit, and the loudspeaker protection circuit will be activated (see section 'Trouble

shooting' also).

AT2-2100 V1.0/17.01.2018