ASTLES SENSOLUTION C800 Installation und Betrieb - Seite 4

Blättern Sie online oder laden Sie pdf Installation und Betrieb für Messgeräte ASTLES SENSOLUTION C800 herunter. ASTLES SENSOLUTION C800 20 Seiten.

C800 Analyser Operating Manual

2. Mechanical Installation

The C800 may be supplied in an aluminium enclosure connected to a
Model 300 or as a stand-alone unit.
To install the sensor:
Cut a 75mm diameter hole in the tank lid.
Insert the Model 300 through the hole and allow the probe to
rest on the flange.
Loosen the grub screw in the flange to adjust the depth of the
probe.
There is normally no need to bolt the flange down.

2.1. Open Installation

If the analyser is to be mounted separately, use an Astles Control Systems universal mounting kit
(500/9501) to fix it to a pipe or wall. To attach the analyser to the mounting kit use M6 bolts,
washers, and nuts.
902857-A - C800 Analyser Operating Manual.docx
4