Donovan Hammer II Benutzerhandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Industrielle Ausrüstung Donovan Hammer II herunter. Donovan Hammer II 20 Seiten. Arm system for belly dumps, end dumps, dump bodies & pups

Seite drucken
Manual Crank Installation - continued
NOTE: Entire chain guard assembly can be welded together
and to truck body. If bolting is preferred, continue with
following steps.
STEP 5: Attach lower chain guard to control box using 5/16"
bolt
, washers
F
L
P
control
box
STEP 6: Place upper chain guard over lower chain guard and
adjust height until chain and sprocket assembly are
safely covered.
STEP 7: Mark and drill 5/16" holes through lower chain guard
using upper chain guard hole pattern as template.
STEP 8: Attach upper guard to lower guard using 5/16" bolt
, washers
F
P
lower chain
guard
L
P
drill
5/16"
holes
13
and lock nuts
.
P
L
lower chain
guard
and lock nuts
.
L
&
cover chain
sprocket
upper chain
guard
adjust
height
STEP 9: Attach chain guard brackets near top of upper chain
guard. Mark and drill 5/16" holes through upper chain
guard for mounting. Use 5/16" bolt
lock nuts
chain
guard
bracket
F
F
STEP 10: Secure chain guard brackets to truck box using sheet
metal screws
chain
guard
bracket
F
P/N 1809533 Rev. B
to secure bracket to chain guard.
L
L
P
lower chain
guard
.
A
A
lower chain
guard
, washers
and
F
P
chain
guard
F
bracket
upper chain
guard
chain
guard
bracket
A
upper chain
guard