Donovan Hammer II Manual del usuario - Página 16
Navegue en línea o descargue pdf Manual del usuario para Equipamiento industrial Donovan Hammer II. Donovan Hammer II 20 páginas. Arm system for belly dumps, end dumps, dump bodies & pups
Imprimir páginaManual Crank Installation - continued
NOTE: Entire chain guard assembly can be welded together
and to truck body. If bolting is preferred, continue with
following steps.
STEP 5: Attach lower chain guard to control box using 5/16"
bolt
, washers
F
L
P
control
box
STEP 6: Place upper chain guard over lower chain guard and
adjust height until chain and sprocket assembly are
safely covered.
STEP 7: Mark and drill 5/16" holes through lower chain guard
using upper chain guard hole pattern as template.
STEP 8: Attach upper guard to lower guard using 5/16" bolt
, washers
F
P
lower chain
guard
L
P
drill
5/16"
holes
13
and lock nuts
.
P
L
lower chain
guard
and lock nuts
.
L
&
cover chain
sprocket
upper chain
guard
adjust
height
STEP 9: Attach chain guard brackets near top of upper chain
guard. Mark and drill 5/16" holes through upper chain
guard for mounting. Use 5/16" bolt
lock nuts
chain
guard
bracket
F
F
STEP 10: Secure chain guard brackets to truck box using sheet
metal screws
chain
guard
bracket
F
P/N 1809533 Rev. B
to secure bracket to chain guard.
L
L
P
lower chain
guard
.
A
A
lower chain
guard
, washers
and
F
P
chain
guard
F
bracket
upper chain
guard
chain
guard
bracket
A
upper chain
guard