Door-Gard 212i Stromlaufpläne und Spezifikationen - Seite 3

Blättern Sie online oder laden Sie pdf Stromlaufpläne und Spezifikationen für Tastenfeld Door-Gard 212i herunter. Door-Gard 212i 4 Seiten.

Seite drucken
212i Wiring Diagrams
6-040400 X2
To control the LED's externally cut the four
traces in the box underneath connector J1.
Before connecting the alarm panel's LED
control lines to J1 verify the traces are cut.
To verify, measure continuity between the
end of the wire on the wire harness and the
square pad on the circuit board below the box
corresponding to the wire you're measuring.
Permanent damage to the keypad may
result if voltage is connected to J1 when
the traces are not cut.
3