Door-Gard 212i Wiring Diagrams & Specifi Cations - Page 3

Browse online or download pdf Wiring Diagrams & Specifi Cations for Keypad Door-Gard 212i. Door-Gard 212i 4 pages.

Print Page

212i Wiring Diagrams

6-040400 X2

To control the LED's externally cut the four

traces in the box underneath connector J1.

Before connecting the alarm panel's LED

control lines to J1 verify the traces are cut.

To verify, measure continuity between the

end of the wire on the wire harness and the

square pad on the circuit board below the box

corresponding to the wire you're measuring.

Permanent damage to the keypad may

result if voltage is connected to J1 when

the traces are not cut.