astra telematics AT240 Installationshandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Installationshandbuch für GPS astra telematics AT240 herunter. astra telematics AT240 5 Seiten. Advanced vehicle tracking device
Auch für astra telematics AT240: Benutzerhandbuch (12 seiten)
6. Connect the CB001 3-way power & ignition cable
7. Hook up the power and ignition electrical connections
Connect the RED and BLACK wires to a PERMANENT +12V/+24V vehicle power source.
Connect the ignition sense input (Digital 1) to an ignition switched 12/24V signal (i.e.
something that only goes live when the vehicle ignition is ON)
i. RED
ii. BLACK
iii. WHITE
We recommend that all connections should be soldered to ensure reliable terminations.
Crimps and IDC type terminations can be unreliable if used with the wrong tooling and/or
wires sizes.
All unused wires should be left insulated to avoid undesired behaviour.
8. Fit the IB001 iButton Probe (optional)
Fit the IB001 iButton probe in the desired position on the vehicle dashboard (requires drilling
a hole) and then connect to the matching connector on the CB243
9. Fit the CC001 CAN-click adapter (optional)
Fit the CC001 contactless CAN-click adapter to the CANH and CANL wires and then connect
the other end to the matching connector on the CB243
10. Fit the CB242 OBD adapter cable (optional)
Our CB242 OBD cable provides 2 options for J1962 CANH and CANL termination:
Pins 6 and 14 as per the J1962 standard (if unsure, we suggest you try this one)
Pins 1 and 9
as implemented by some vehicle manufacturers
Plug the CB242 OBD cable into the vehicle OBD socket and then connect the other end
(marked "CAN 1&9" or "CAN 6&14") to the matching connector on the CB243 cable
Plug the CB001 cable into the matching
connector on the CB243
PERMANENT +12 / +24V
GROUND
IGNITION SWITCHED +12/24V
1A FUSED
1A FUSED
1A FUSED