astra telematics AT240 Kurulum Kılavuzu - Sayfa 3

GPS astra telematics AT240 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. astra telematics AT240 5 sayfaları. Advanced vehicle tracking device
Ayrıca astra telematics AT240 için: Kullanıcı Kılavuzu (12 sayfalar)

Sayfayı Yazdır

6. Connect the CB001 3-way power & ignition cable

7. Hook up the power and ignition electrical connections

Connect the RED and BLACK wires to a PERMANENT +12V/+24V vehicle power source.

Connect the ignition sense input (Digital 1) to an ignition switched 12/24V signal (i.e.

something that only goes live when the vehicle ignition is ON)

i. RED

ii. BLACK

iii. WHITE

We recommend that all connections should be soldered to ensure reliable terminations.

Crimps and IDC type terminations can be unreliable if used with the wrong tooling and/or

wires sizes.

All unused wires should be left insulated to avoid undesired behaviour.

8. Fit the IB001 iButton Probe (optional)

Fit the IB001 iButton probe in the desired position on the vehicle dashboard (requires drilling

a hole) and then connect to the matching connector on the CB243

9. Fit the CC001 CAN-click adapter (optional)

Fit the CC001 contactless CAN-click adapter to the CANH and CANL wires and then connect

the other end to the matching connector on the CB243

10. Fit the CB242 OBD adapter cable (optional)

Our CB242 OBD cable provides 2 options for J1962 CANH and CANL termination:

Pins 6 and 14 as per the J1962 standard (if unsure, we suggest you try this one)

Pins 1 and 9

as implemented by some vehicle manufacturers

Plug the CB242 OBD cable into the vehicle OBD socket and then connect the other end

(marked "CAN 1&9" or "CAN 6&14") to the matching connector on the CB243 cable

Plug the CB001 cable into the matching

connector on the CB243

PERMANENT +12 / +24V

GROUND

IGNITION SWITCHED +12/24V

1A FUSED