Doorentryonline SR2-X Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kartenleser Doorentryonline SR2-X herunter. Doorentryonline SR2-X 12 Seiten. Proximity, wiegand & mifare card reader with remote control

Seite drucken

Add Visitor Users via the Remote Control

Up to 10 Visitor Users can be added and allowed no more than ten times of usage until they are

automatically invalid. The USER ID numbers must be 990-999 for this function to operate

Programming Step

1. Enter Program Mode

2. Add PIN

3. Add Card

4. Exit Program Mode

Delete User Cards or PIN code Via the Remote Control

Programming Step

1. Enter Program Mode

2. Delete Card/PIN: By read card

3. Delete Card: By User ID

number

4. Delete Card: By Card Number

5. Delete all users

6. Exit Program Mode

Set Relay Configuration Via the Remote Control

The relay configuration sets the behavior of the output relay on activation

Programming Step

1. Enter Program Mode

2. Pulse Mode

3. Latch Mode

4. Exit Program Mode

Remote Control Operation

* (Master Code) #

1 (User ID) # (0-9) # (Enter PIN number, 4-6 digits)

1 (User ID) # (0-9) # (Present Card) #

The user ID numbers must be from 990-999

(0-9) Means the number of usage times – 0=10 times

Remote Control Operation

* (Master Code) #

2 (Present Card/Or enter Pin code) #

Repeat step 2 for additional user cards before pressing the

2 (Enter user ID number) #

The user ID is any number from 0-986

2 (Input the 8/10 digits Card number) #

2 (Master Code) #

Remote Control Operation

* (Master Code) #

3 (1-99) #

The relay time is 1-99 seconds. (1=50ms) Default is 5

seconds

30 # Sets the relay to ON/OFF Latch mode