Astralpool 23199 Installationshandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Installationshandbuch für Beleuchtungsanlagen Astralpool 23199 herunter. Astralpool 23199 3 Seiten. Dynamic lever

Astralpool 23199 Installationshandbuch
INSTALLATION MANUAL DYNAMIC LEVER COD.: 23199 / 23200
CHECKING OF THE PACKING
To verify that the components of the chosen model are in good
condition.
INSTALATION
1. To choose the suitable emplacement bearing the following thing in
mind:
The measures of the lever.
The minimal levels of safety recommended.
The minimal levels of depth of the swimming pool.
2. For a correct and solid fixation to the soil, a zone swarmed as
foundation must be provided.
3. To realize the holes for the fixation of the rear and previous part as
is indicated bearing in mind the wished emplacement of the lever.
4. To place the rear anchorages in the hole indicated (fig. 1).
5. To put the concrete and to hope that it sets.
6. Once the concrete has plotted, realize the drills with reel of diameter
12 mm. Correspondents to the previous succession and to place the
plugs
.
7. To place the protective rubbers that join the base with the
rest of the rail.
.
8. Previously, to mount the parts support of the rail and the base of the
lever (Pos. 3).
9. To place the structure mounted in its emplacement and to fix it (it is
attached tornilleria) to the rear anchorage without being too tight too
much.
10.To fix the mounted structure for its previous part getting across with
the concave ring and being too tight in order that the plug
previously already mounted expands and remains fixed.
11.To fix the rung and the base of the rail for its rear part. To face the
assembly of the rail and the base of the lever perpendicularly. To
coil the 2 pieces will join.
12.To mount the rails (Pos. 1) fitting them with the structure and to fix
them using the screws that are attached.
13.To place the platform (Pos. 2) on the base of the rail and to face the
holes to pass the screws M14x120. Insure yourself that 4 protective
rubbers have been placed.
* * * Read attentivly this manual befote proceeding to the assembly* * *
POS.
CODE
1
18541-0100 RAIL DYNAMIC
2
23199-1000 PLATFORM DYNAMIC
2
23200-1000 PLATFORM DYNAMIC
MAINTENANCE
Verify it regularly:
1. The good condition of the fixings to the soil and of the
structure and them being too tight if it is necessary.
2. The condition of the protection rubbers. It is not allowed
the platform (Pos. 2) being in direct contact with the
structure.
3. The good condition of the non-slipping frontal bands
4. That do not appear projections that could cause cuts or
frictions the bathers.
5. To clean the lever (track and structure) with water and
detergent preventing this one does not leak towards the
swimming pool.
SAFETY WARNINGS
Not to delay the repair or substitution of any damaged part
that could be a reason of an accident.
Respect the existing procedure in every country with
relation to the emplacement and safety levels.
ADVICES TO AVOID ACCIDENTS
Insure yourself that the safety zone of bathers is clear
before jumping.You must neither jump nor place in the end
more than 1 person.
Once finished the assembly keep this manual in sure
place for if at some time you need some spare part.
DESCRIPTION
COTA A
2 mts
2,3 mts