Astralpool 23199 설치 매뉴얼 - 페이지 2

{카테고리_이름} Astralpool 23199에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astralpool 23199 3 페이지. Dynamic lever

페이지 인쇄

INSTALLATION MANUAL DYNAMIC LEVER COD.: 23199 / 23200

CHECKING OF THE PACKING

To verify that the components of the chosen model are in good

condition.

INSTALATION

1. To choose the suitable emplacement bearing the following thing in

mind:

The measures of the lever.

The minimal levels of safety recommended.

The minimal levels of depth of the swimming pool.

2. For a correct and solid fixation to the soil, a zone swarmed as

foundation must be provided.

3. To realize the holes for the fixation of the rear and previous part as

is indicated bearing in mind the wished emplacement of the lever.

4. To place the rear anchorages in the hole indicated (fig. 1).

5. To put the concrete and to hope that it sets.

6. Once the concrete has plotted, realize the drills with reel of diameter

12 mm. Correspondents to the previous succession and to place the

plugs

7. To place the protective rubbers that join the base with the

rest of the rail.

8. Previously, to mount the parts support of the rail and the base of the

lever (Pos. 3).

9. To place the structure mounted in its emplacement and to fix it (it is

attached tornilleria) to the rear anchorage without being too tight too

much.

10.To fix the mounted structure for its previous part getting across with

the concave ring and being too tight in order that the plug

previously already mounted expands and remains fixed.

11.To fix the rung and the base of the rail for its rear part. To face the

assembly of the rail and the base of the lever perpendicularly. To

coil the 2 pieces will join.

12.To mount the rails (Pos. 1) fitting them with the structure and to fix

them using the screws that are attached.

13.To place the platform (Pos. 2) on the base of the rail and to face the

holes to pass the screws M14x120. Insure yourself that 4 protective

rubbers have been placed.

* * * Read attentivly this manual befote proceeding to the assembly* * *

POS.

CODE

18541-0100 RAIL DYNAMIC

23199-1000 PLATFORM DYNAMIC

23200-1000 PLATFORM DYNAMIC

MAINTENANCE

Verify it regularly:

1. The good condition of the fixings to the soil and of the

structure and them being too tight if it is necessary.

2. The condition of the protection rubbers. It is not allowed

the platform (Pos. 2) being in direct contact with the

structure.

3. The good condition of the non-slipping frontal bands

4. That do not appear projections that could cause cuts or

frictions the bathers.

5. To clean the lever (track and structure) with water and

detergent preventing this one does not leak towards the

swimming pool.

SAFETY WARNINGS

Not to delay the repair or substitution of any damaged part

that could be a reason of an accident.

Respect the existing procedure in every country with

relation to the emplacement and safety levels.

ADVICES TO AVOID ACCIDENTS

Insure yourself that the safety zone of bathers is clear

before jumping.You must neither jump nor place in the end

more than 1 person.

Once finished the assembly keep this manual in sure

place for if at some time you need some spare part.

DESCRIPTION

COTA A

2 mts

2,3 mts