Canon PIXMA MX330 Handbuch "Erste Schritte - Seite 14
Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Alles in einem Drucker Canon PIXMA MX330 herunter. Canon PIXMA MX330 37 Seiten. Cartridge reset
Auch für Canon PIXMA MX330: Handbuch (4 seiten)
Seite drucken
- 1. Getting Started
- 2. Remove the Protective Material
- 3. Connect the Telephone Line
- 4. Turn the Power on
- 5. Install the FINE Cartridges
- 6. Set up for Fax Reception
- 7. Install the Software
- 8. Loading Paper
- 9. After Installing the Machine
- 10. Try Using the Machine
- 11. Try Copying
- 12. Print Photos from a Computer
- 13. Send Faxes
- 14. Maintenance
- 15. Specifications
7
Windows
If the Found New Hardware or Found New
Hardware Wizard dialog box appears:
1
Remove the USB cable connected to
your computer.
The dialog box may close. In this case, proceed
from
.
2
Click Cancel to quit the dialog box.
3
Proceed from
.
Macintosh
1
A
TURN OFF THE MACHINE (A).
•
Operating noise continues for about 25 seconds
until the machine turns off. Make sure that the
ON button (A) stops flashing.
2
Turn on the computer, then insert the Setup CD-ROM
into the CD-ROM drive.
The setup program should start automatically.
Windows Vista
Windows XP/2000
•
If the program does not start automatically, double-click the
CD-ROM icon on the computer. When the CD-ROM contents
appear, double-click MSETUP4.EXE.
Go to Step
.
Go to Step
.