Canon PIXMA MX330 Aan de slag handleiding - Pagina 14
Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Canon PIXMA MX330. Canon PIXMA MX330 37 pagina's. Cartridge reset
Ook voor Canon PIXMA MX330: Handmatig (4 pagina's)
Pagina afdrukken
- 1. Getting Started
- 2. Remove the Protective Material
- 3. Connect the Telephone Line
- 4. Turn the Power on
- 5. Install the FINE Cartridges
- 6. Set up for Fax Reception
- 7. Install the Software
- 8. Loading Paper
- 9. After Installing the Machine
- 10. Try Using the Machine
- 11. Try Copying
- 12. Print Photos from a Computer
- 13. Send Faxes
- 14. Maintenance
- 15. Specifications
7
Windows
If the Found New Hardware or Found New
Hardware Wizard dialog box appears:
1
Remove the USB cable connected to
your computer.
The dialog box may close. In this case, proceed
from
.
2
Click Cancel to quit the dialog box.
3
Proceed from
.
Macintosh
1
A
TURN OFF THE MACHINE (A).
•
Operating noise continues for about 25 seconds
until the machine turns off. Make sure that the
ON button (A) stops flashing.
2
Turn on the computer, then insert the Setup CD-ROM
into the CD-ROM drive.
The setup program should start automatically.
Windows Vista
Windows XP/2000
•
If the program does not start automatically, double-click the
CD-ROM icon on the computer. When the CD-ROM contents
appear, double-click MSETUP4.EXE.
Go to Step
.
Go to Step
.