Astralpool QG50 Benutzerhandbuch - Seite 12
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schwimmbad-Staubsauger Astralpool QG50 herunter. Astralpool QG50 16 Seiten. Robotic pool cleaner
Seite drucken
12
5.2
Replacing Wear Parts
5.2.1
Replacing Brushes
The cleaner is fitted with a TPE brush in front. There are
''wear'' indicators (Figure 27) on the brush.
Figure 27. Worn Brush Indicator
To maintain cleaner performance at its best you
need to replace the brush as soon as one of the wear
indicators is reached (even if the blade wear is not
even). It is recommended that you replace the brush
when the rubber is worn down to the top of the wear
indicator (or every two years, whichever comes first).
To replace a worn brush:
1.
Separate the edges of the brush, undo the tabs, and
remove the worn brush.
2.
Position the new brush underneath the roller with the
spikes facing downwards (Figure 28).
Figure 28. Position the New Brush on Roller
QG50 robotic cleaner
3.
raised groove becomes
partially flattened,
indicating excessive
wear
Figure 29. Pull Tabs Through Each Slot
4.
Figure 30. Cut Tabs
5.3
1.
Figure 31. Stand Cleaner on its Side
Thread each tab into the slot provided and gently feed
it through until the heel comes out at the other side of
the slot (Figure 29).
4
Use scissors to cut the tabs so they are no higher than
the spikes (Figure 30).
Replacing the Track
Stand the cleaner on its side (Figure 31).
owner's Manual