Astralpool QG50 소유자 매뉴얼 - 페이지 12

{카테고리_이름} Astralpool QG50에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astralpool QG50 16 페이지. Robotic pool cleaner

5.2

Replacing Wear Parts

5.2.1

Replacing Brushes

The cleaner is fitted with a TPE brush in front. There are

''wear'' indicators (Figure 27) on the brush.

Figure 27. Worn Brush Indicator

To maintain cleaner performance at its best you

need to replace the brush as soon as one of the wear

indicators is reached (even if the blade wear is not

even). It is recommended that you replace the brush

when the rubber is worn down to the top of the wear

indicator (or every two years, whichever comes first).

To replace a worn brush:

Separate the edges of the brush, undo the tabs, and

remove the worn brush.

Position the new brush underneath the roller with the

spikes facing downwards (Figure 28).

Figure 28. Position the New Brush on Roller

QG50 robotic cleaner

raised groove becomes

partially flattened,

indicating excessive

wear

Figure 29. Pull Tabs Through Each Slot

Figure 30. Cut Tabs

5.3

Figure 31. Stand Cleaner on its Side

Thread each tab into the slot provided and gently feed

it through until the heel comes out at the other side of

the slot (Figure 29).

Use scissors to cut the tabs so they are no higher than

the spikes (Figure 30).

Stand the cleaner on its side (Figure 31).

owner's Manual