Cognex DataMan 8072 DL Kurzreferenz-Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für Barcode-Leser Cognex DataMan 8072 DL herunter. Cognex DataMan 8072 DL 19 Seiten.

Installation

Installation procedures and specifications are presented in detail in the DataMan

8072 DL Reference Manual, which is installed with the DataMan Setup Tool. From

the Windows Start menu, select the following to access the manual: All Programs >

Cognex > DataMan Software vx.x.x > Documentation.

Note:

Cables are sold separately.

If a standard component is missing or damaged, immediately contact

your Cognex Authorized Service Provider (ASP) or Cognex

Technical Support.

CAUTION:

All cable connectors are "keyed" to fit the connectors on the

DataMan system; do not force the connectors or damage may occur.

Install Software and Documentation and

Connect the Reader

To configure a DataMan 8072 DL reader, the DataMan Setup Tool software must

be installed on a networked PC. The DataMan Setup Tool is available from the

DataMan support site: http://www.cognex.com/support/dataman.

1. After installing the software, connect the DataMan 8072 DL to your PC.

2. Launch the DataMan Setup Tool and click Refresh.

3. Select your DataMan 8072 DL reader from the list and click Connect.