Cognex DataMan 8072 DL 빠른 참조 매뉴얼 - 페이지 9

{카테고리_이름} Cognex DataMan 8072 DL에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cognex DataMan 8072 DL 19 페이지.

Installation

Installation procedures and specifications are presented in detail in the DataMan

8072 DL Reference Manual, which is installed with the DataMan Setup Tool. From

the Windows Start menu, select the following to access the manual: All Programs >

Cognex > DataMan Software vx.x.x > Documentation.

Note:

Cables are sold separately.

If a standard component is missing or damaged, immediately contact

your Cognex Authorized Service Provider (ASP) or Cognex

Technical Support.

CAUTION:

All cable connectors are "keyed" to fit the connectors on the

DataMan system; do not force the connectors or damage may occur.

Install Software and Documentation and

Connect the Reader

To configure a DataMan 8072 DL reader, the DataMan Setup Tool software must

be installed on a networked PC. The DataMan Setup Tool is available from the

DataMan support site: http://www.cognex.com/support/dataman.

1. After installing the software, connect the DataMan 8072 DL to your PC.

2. Launch the DataMan Setup Tool and click Refresh.

3. Select your DataMan 8072 DL reader from the list and click Connect.