Astrel Instruments AST-8300-A Automanualr Handbuch - Seite 14

Blättern Sie online oder laden Sie pdf Automanualr Handbuch für Sicherheitskamera Astrel Instruments AST-8300-A herunter. Astrel Instruments AST-8300-A 14 Seiten.
Auch für Astrel Instruments AST-8300-A: Erste Schritte (20 seiten), Benutzerhandbuch (6 seiten)

Seite drucken

Astrel Instruments

AST-8300-A

1. Everything on the photographic setup should be tightened: focusers, camera mounts,

mounting of the optical tubes to each other and to the telescope mount, mounting of the

mount head to the tripod/column, etc. The camera wires shouldn't dangle. The floppy

cable parts should be as short as possible.

2. It is recommened to induce small imbalance along RA in the direction opposite to the

diurnal rotation.

3. If the guiding star is too bright, It is recommended to adjust camera (if the hardware

allows) to eliminate overluminance.

4. The change in camera parameters (Gain, FPS, etc.) requires the obligatory recalibration

of the camera with the dark frame, if it is used.

5. It is recommended to use the two-axes calibration method in the near-polar regions,

where the drift along RA is very short during the calibration.

AUTHOR

Andrew Stepanenko (Galaxy Master) <[email protected]>

AST8300 CCD camera version porting: Andrea Ricciardi <[email protected]>

PROJECT PAGE

http://sourceforge.net/projects/linguider/

SUPPORT

<[email protected]>

Autoguider Manual

14/14

rev A