AMES SILVER BULLET 3000SS Series Einbauanleitung

Blättern Sie online oder laden Sie pdf Einbauanleitung für Kontrolleinheit AMES SILVER BULLET 3000SS Series herunter. AMES SILVER BULLET 3000SS Series 4 Seiten. Double check valve, assemblies & double check detector assemblies

Seite drucken

Series 2000SS/SE & 3000SS/SE

Double Check Valve

Assemblies & Double

Check Detector

Assemblies

Sizes: 2

" – 6"SS (65 – 150mm)

6" – 8"SE (150 – 200mm)

• Installation

• Service

• Repair Kits

• Maintenance

Installation Note: The flange gasket bolts for

the gate valves should be retightened during

installation as the bolts may have loosened

due to storage and shipping.

A Division of Watts Water Technologies, Inc.

1427 North Market Blvd. • Suite #9 • Sacramento, CA 95834 • Phone: 916-928-0123 • Fax: 916-928-9333

Ames product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Ames Technical Service.

Ames reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and

modifications on Ames products previously or subsequently sold.

2000SS

For other repair kits and service parts, send for

Ames Repair Parts Price List, PL-A-RP-BPD.

For technical assistance, contact your local

Ames representative.

IMPORTANT: Inquire with governing

authorities for local installation requirements.

NOTE: For Australia and New Zealand, line

strainers should be installed between the

upstream shutoff valve and the inlet of the

backflow preventer.

Its important that this assembly be tested

periodically in compliance with local codes,

but at least once per year or more as service

conditions warrant. If installed on a fire

sprinkler system, all mechanical checks,

such as alarm checks and backflow

preventers, should be flow tested and

inspected internally in accordance with NFPA

13 and NFPA 25.

Limited Warranty: Ames Company warrants each product

to be free from defects in material and workmanship

under normal usage for a period of one year from the date

of original shipment. In the event of such defects within

the warranty period, the Company will, at its option,

replace or recondition the product without charge. This

shall constitute the sole and exclusive remedy for breach

of warranty, and the Company shall not be responsible for

any incidental, special or consequential damages,

including without limitation, lost profits or the cost of

repairing or replacing other property which is damaged if

www.amesfirewater.com

RP/IS-A-2000SS/SE&3000SS/SE

this product does not work properly, other costs resulting

from labor charges, delays, vandalism, negligence, fouling

caused by foreign material, damage from adverse water

conditions, chemical, or any other circumstances over

which the Company has no control. This warranty shall be

invalidated by any abuse, misuse, misapplication or

improper installation of the product. THIS WARRANTY IS

IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE. Any implied warranties that are imposed by

law are limited in duration to one year.

Some States do not allow limitations on how long an

implied warranty lasts, and some States do not allow

the exclusion or limitation of incidental or consequential

damages. Therefore the above limitations may not

apply to you. This Limited Warranty gives you specific

legal rights, and you may have other rights that vary

from State to State. You should consult applicable state

laws to determine your rights.