Akw PW90 Einbauanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Einbauanleitung für Sanitärprodukt Akw PW90 herunter. Akw PW90 4 Seiten. 15 & 22mm shower waste

Seite drucken

Installation Instructions

Technical Help line

(1) As a "dry run", first place

the tray into the desired

location either into wooden

or solid floors. Determine the

position, the depth and the

clearance required for the

waste with at least a 1 in 40

fall from the waste to the

outlet pipe. Ensure there is

sufficient support around the

waste area, see separate tray

instructions.

(2) Insert the 15/22mm

waste outlet pipe into the

waste body and insert the

"C" clip to seal the outlet

pipe. Check the pipe

connection is correctly sealed

and watertight by pouring

some water through it.

Ensure that the rubber

clamping ring seal (A) is

positioned into the recessed

section on the top of the

waste body before connecting

to the tray.

(3-4) Apply flexible adhesive to

the tray and ensure that the

tray is level.

Lower the tray into position

either into or onto wooden or

concrete floors and then re-

align with the waste body.

(5-6) Ensure that the

clamping ring (B) is screwed

correctly to the waste body.

Do not over tighten but

ensure a tight seal.

(7) Lower the waste trap body

into waste main body and

ensure a tight seal is achieved.

(8) Fit the cover ensuring the

location pegs are inserted fully

home into the cover.

01905 560219