Ametek Crystal Pressure WT Series Betriebshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Prüfgeräte Ametek Crystal Pressure WT Series herunter. Ametek Crystal Pressure WT Series 19 Seiten. Digital test gauge

Seite drucken
8
Functions
Low Battery Indication
The Battery icon (
) uses three bars to display the battery level. When the icon displays all three bars, the batteries are full. The WT Series will continue to
operate accurately while the icon is visible. When the batteries are exhausted, the letters
batt
will appear across the display. After
batt
appears, no pressure
measurements will be possible until the batteries are replaced.
Battery Replacement
The WTSeries gauge uses 3 AAA alkaline batteries. The batteries are located above the gauge behind a metal panel. With a small flat blade screwdriver, un-
screw the two panel screws to gain access to the battery compartment. Remove the battery holder and slide the cover off. After replacing the batteries, the
gauge will start operating immediately (without having to press the button). This indicates that a complete reset has occurred, and is normal.
!
CAUTION: Do not mix battery types or manufacturers.
XP2i Operation Manual