Ametek Crystal Pressure WT Series Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt testowy Ametek Crystal Pressure WT Series. Ametek Crystal Pressure WT Series 19 stron. Digital test gauge

Drukuj stronę
8
Functions
Low Battery Indication
The Battery icon (
) uses three bars to display the battery level. When the icon displays all three bars, the batteries are full. The WT Series will continue to
operate accurately while the icon is visible. When the batteries are exhausted, the letters
batt
will appear across the display. After
batt
appears, no pressure
measurements will be possible until the batteries are replaced.
Battery Replacement
The WTSeries gauge uses 3 AAA alkaline batteries. The batteries are located above the gauge behind a metal panel. With a small flat blade screwdriver, un-
screw the two panel screws to gain access to the battery compartment. Remove the battery holder and slide the cover off. After replacing the batteries, the
gauge will start operating immediately (without having to press the button). This indicates that a complete reset has occurred, and is normal.
!
CAUTION: Do not mix battery types or manufacturers.
XP2i Operation Manual