AIR GAP AG110-002 Kurzanleitung

Blättern Sie online oder laden Sie pdf Kurzanleitung für Water Filtration Systems AIR GAP AG110-002 herunter. AIR GAP AG110-002 2 Seiten. Reverse osmosis air gap

Seite drucken

4. The AG110-002 must be installed with the "C/L" line

above the sink's rim, sump, floor drain, floor grate, or

standpipe where the discharge tubing is terminated. The

AG110-002must be installed vertically. Secure

AG110-002 with provided mounting screws (See Fig 1-4).

Mounting Screws

Critical Level (C/L) marking

"C/L"

0.857"-0.900"

Fig 1-4

5. Connect 3/8" OD poly tubing from

your RO unit to AG110-002 inlet port

and 3/8" OD poly tubing from the

AG110-002 outlet port to the drain

pipe. Use provided clamps and

screws to secure tubing. (See FIG

1-5)

Fig 1-5

500 Jefferson Street, Placentia, California 92870 USA • 949-955-3928 • Email: [email protected]

1/4" O.D.

Poly tubing

Clamp

3/8" O.D.

Poly tubing

Model:

AG110-002

REVERSE OSMOSIS

AIR GAP

Old Part Number:

GAP-A-RO, KIT S-B

Doc.#400-0807-001

Placentia, California