AIR GAP AG110-002 Kurzanleitung - Seite 2
Blättern Sie online oder laden Sie pdf Kurzanleitung für Water Filtration Systems AIR GAP AG110-002 herunter. AIR GAP AG110-002 2 Seiten. Reverse osmosis air gap
Seite drucken1- Reverse Osmosis Air Gap
1- Mounting Bracket
4- 3/8 Nylon Clamp
6- #6-1", Phillips Pan Head Screws
The AG110-002 Reverse Osmosis Filter Air Gap prevents back-flow from the discharge line into
the RO system. The discharge water flows out of the reverse osmosis system into the air gap
inlet, passes air-gap, and then down to the drain piping.
• Secure connection of inlet and outlet ports.
• Tested for maximum 0.4 GPM (1.5 Liters/minute)
• Suggested flow rate 1 to 16 oz/minute (30 to 500 milliliters/minute)
• UPC® listed, tested for compliance with IPC and NSF standards
Please read the instructions once through before starting.
AG110-002 INSTALLATION INSTRUCTION
1. Make sure that the flow rate output of the RO equipment meets AG110-002 flow capacity limits such
as 0.4 GPM (1.5 Liters/minute).
2. Check inlet and outlet ports marking on AG110-002 body and install AG110-002 into the threaded opening of the
mounting bracket as shown on FIG 1-1 (mounting options 1 and 2), for dimensions see FIG 1-2.
Mounting option 1
Reverse Osmosis
Air Gap Drain
Inlet Marking
Inlet Port
Outlet
Marking
Mounting Bracket
Outlet Port
AG110-002
Discharge
Drain Pipe
AG110-002
Installation Procedures
LIST OF PARTS ENCLOSED
Always comply with local plumbing codes during installation
Inlet Marking
Fig 1-1
Outlet Port
Fig 1-3
Water supply
RO Tank
RO System
Mounting option 2
Reverse Osmosis
Air Gap Drain
Inline Reverse Osmosis
Inlet Port
air gap
Outlet
Marking
Mounting Bracket
3. AG110-002 is a gravity flow device and must have an
outlet poly tubing feeding directly to a drain without kinks
or bends. The AG110-002 must be permanently
connected to enable the discharge water to flow freely
through the outlet tubing. (See FIG 1-3)
Water Cooler
-OVER-
-OVER-
1.14"
3.7"
1"
Fig 1-2