- ページ 2

浄水器 AIR GAP AG110-002のPDF クイックマニュアルをオンラインで閲覧またはダウンロードできます。AIR GAP AG110-002 2 ページ。 Reverse osmosis air gap

ページを印刷する

1- Reverse Osmosis Air Gap

1- Mounting Bracket

4- 3/8 Nylon Clamp

6- #6-1", Phillips Pan Head Screws

The AG110-002 Reverse Osmosis Filter Air Gap prevents back-flow from the discharge line into

the RO system. The discharge water flows out of the reverse osmosis system into the air gap

inlet, passes air-gap, and then down to the drain piping.

• Secure connection of inlet and outlet ports.

• Tested for maximum 0.4 GPM (1.5 Liters/minute)

• Suggested flow rate 1 to 16 oz/minute (30 to 500 milliliters/minute)

• UPC® listed, tested for compliance with IPC and NSF standards

Please read the instructions once through before starting.

AG110-002 INSTALLATION INSTRUCTION

1. Make sure that the flow rate output of the RO equipment meets AG110-002 flow capacity limits such

as 0.4 GPM (1.5 Liters/minute).

2. Check inlet and outlet ports marking on AG110-002 body and install AG110-002 into the threaded opening of the

mounting bracket as shown on FIG 1-1 (mounting options 1 and 2), for dimensions see FIG 1-2.

Mounting option 1

Reverse Osmosis

Air Gap Drain

Inlet Marking

Inlet Port

Outlet

Marking

Mounting Bracket

Outlet Port

AG110-002

Discharge

Drain Pipe

AG110-002

Installation Procedures

LIST OF PARTS ENCLOSED

Always comply with local plumbing codes during installation

Inlet Marking

Fig 1-1

Outlet Port

Fig 1-3

Water supply

RO Tank

RO System

Mounting option 2

Reverse Osmosis

Air Gap Drain

Inline Reverse Osmosis

Inlet Port

air gap

Outlet

Marking

Mounting Bracket

3. AG110-002 is a gravity flow device and must have an

outlet poly tubing feeding directly to a drain without kinks

or bends. The AG110-002 must be permanently

connected to enable the discharge water to flow freely

through the outlet tubing. (See FIG 1-3)

Water Cooler

-OVER-

1.14"

3.7"

Fig 1-2