Dora Metal DM-S-95106 Gebrauchsanweisung - Seite 6
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Kühler Dora Metal DM-S-95106 herunter. Dora Metal DM-S-95106 12 Seiten. Shock chiller/freezers
Seite drucken
The appliance can be levelled by screwing or unscrewing the adjustable legs.
Precise levelling will prevent noisy work of the compressor.
With planning of placing the appliance, you should take into account the place
for free open the doors and eventual entering of trolley.
ELECTRIC TERMINAL
The appliance is designed for 230V 50Hz power supply and should be supplied
from a separate low voltage circuit secured by fuses not exceeding 16A.
The appliance is fitted with a protective PE cable.
Prior to change of the connector the flexible conductor has to be fitted with an
adequate terminal (Y-type terminal).
The appliance can be started only after the effectiveness of fire
precautions has been verified by measurements conducted in
accordance with the regulations in force.
After it is confirmed that the electrical system meets the above mentioned
requirements, the unit can be finally connected to power supply by placing the
connector in the plug-in socket.
The unit prepared according to the above guidelines is ready to operate.
Since the appliance could get out of plumb by radius bigger that 30
connecting of the appliance to power supply should be delayed by 3
hours. Otherwise the condensation unit can be damaged.
USE AND OPERATION
It is recommended to introduce occasional breaks in the appliance operation in
order to clean the interior and compressor condenser.
In order to perform the activities specified above you should disconnect the
appliance by using the power switch and taking the connecting plug out of the plug-in
socket.
In order to clean the unit condenser the front unit chamber night blind should be
removed.
The unit condenser should be cleaned at least once a month. A soft brush or
vacuum cleaner can be used in order to clean the unit condenser.
Water jet cannot be used to clean the appliance. The producer will not
assume responsibility for the damage of the condensation unit if the
cleanness of condenser has not been observed.
The appliance is equipped with a drawer-type tray placed under the condensation
unit to collect drips created during thawing process.
6
PL - DORA METAL Spółka z o.o.
Chillers and shock chillers/freezers
,
4