ASTRO DEVICES Nexus DSC Pro Handbuch zur Schnelleinrichtung - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Zubehör ASTRO DEVICES Nexus DSC Pro herunter. ASTRO DEVICES Nexus DSC Pro 13 Seiten.

Seite drucken

ASTRO DEVICES Nexus DSC Pro Handbuch zur Schnelleinrichtung

The telescope does not have to be

positioned exactly at the angle specified,

but it should be within ±10°. You can also set

the altitude reference to any angle between

-180° and +180° by selecting

from the list and by adjusting the angle:

Please note that the altitude reference angle is

individual for each telescope configuration –

this angle will be stored in the settings for the

currently selected telescope.

Nexus DSC Pro will automatically switch the

screen to the selection of first alignment object:

While Nexus DSC Pro can be aligned on any

object in its database it is best to use objects

form either Named Stars catalogue or Bright

Stars catalogue. You can press

the CATALOGUE tab and selecting a different

catalogue then press the

the object selection.

It is time to select the first alignment object – by

pressing

and

star:

Gacrux was selected as it is well above 30

degrees. Now the telescope should be pointed

Gacrux

using

reticle/crosshair or a very high magnification

Custom

to go to

key to return to

to change to another

eyepiece

with

eyepiece. Press the

telescope is pointing at the star.

Nexus DSC Pro will now switch to the selection

of a second alignment object:

Please follow the procedure described above to

change the selection of the second alignment

object if necessary.

Press the

centre of the eyepiece.

Now Nexus DSC Pro will show the alignment

status – Successful or Failed:

Now you can press either the

key to go to the previous menu.

ESC

You can go back to align on first or to align

on second object at any time in case the

alignment error is too big.

Two star alignment using SkySafari

Plus/Pro

Please refer to the SkySafari Setup section in

this guide to start using Nexus DSC Pro with

SkySafari.

Perform the Altitude reference alignment first –

as described above.

Touch the Connect button on the telescope

control panel in SkySafari.

SkySafari will show where the telescope is

pointing but the position will most likely be

incorrect as the two star alignment has not yet

been performed.

In this example the altitude reference was 90º:

Nexus DSC Pro Quick Setup Guide

button once the

button once the star is in the

button or the