Canon EF-M15-45mm F3.5-6.3 IS STM Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Handbuch für Kameraobjektiv Canon EF-M15-45mm F3.5-6.3 IS STM herunter. Canon EF-M15-45mm F3.5-6.3 IS STM 14 Seiten.
Seite drucken
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Do not make any changes or modifications to the equipment unless otherwise
specified in the instructions. If such changes or modifications should be made, you
could be required to stop operation of the equipment.
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna .
• Increase the separation between the equipment and receiver .
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected .
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B) I NMB-3 (B)
1. Mounting and Detaching the Lens
See your camera's instructions for details on mounting and detaching the lens.
2. Shooting Preparations and Retracting Lens
Shooting Preparations:
With the lens retract position index and zoom position index aligned, attach the
lens to the camera. Turn the camera on. A message prompting you to operate
the lens appears on the camera's liquid crystal monitor. Maintain pressure on the
lens-retraction switch in the [•] direction, and slightly rotate the zoom ring in the
direction of the white arrow to release the lens-retraction switch. Further rotate
the zoom ring until it clicks. The message on the camera's liquid crystal monitor
disappears. The lens is now ready for shooting. (The center of the no. 15 pointing
line in the focal length indicator will show above or to the left of the zoom position
index extension line.) (fig .• )
Retracting Lens:
Maintain pressure on the lens-retraction switch in the [•] direction. Rotate the zoom
ring in the opposite direction to the white arrow. Align the lens retract position index
and the zoom position index. Release the lens-retraction switch to retract the lens.