Canon EF-M15-45mm F3.5-6.3 IS STM Manuale - Pagina 3

Sfoglia online o scarica il pdf Manuale per Obiettivo della fotocamera Canon EF-M15-45mm F3.5-6.3 IS STM. Canon EF-M15-45mm F3.5-6.3 IS STM 14.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Do not make any changes or modifications to the equipment unless otherwise

specified in the instructions. If such changes or modifications should be made, you

could be required to stop operation of the equipment.

This equipment has been tested and found to comply with the limits for a class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna .

• Increase the separation between the equipment and receiver .

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected .

• Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3 (B) I NMB-3 (B)

1. Mounting and Detaching the Lens

See your camera's instructions for details on mounting and detaching the lens.

2. Shooting Preparations and Retracting Lens

Shooting Preparations:

With the lens retract position index and zoom position index aligned, attach the

lens to the camera. Turn the camera on. A message prompting you to operate

the lens appears on the camera's liquid crystal monitor. Maintain pressure on the

lens-retraction switch in the [•] direction, and slightly rotate the zoom ring in the

direction of the white arrow to release the lens-retraction switch. Further rotate

the zoom ring until it clicks. The message on the camera's liquid crystal monitor

disappears. The lens is now ready for shooting. (The center of the no. 15 pointing

line in the focal length indicator will show above or to the left of the zoom position

index extension line.) (fig .• )

Retracting Lens:

Maintain pressure on the lens-retraction switch in the [•] direction. Rotate the zoom

ring in the opposite direction to the white arrow. Align the lens retract position index

and the zoom position index. Release the lens-retraction switch to retract the lens.