Astrol Electronic BAT-FLEX Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Handbuch für Messgeräte Astrol Electronic BAT-FLEX herunter. Astrol Electronic BAT-FLEX 19 Seiten.
Seite drucken
1. Connection Drawing
1.1. Connection over Network
The PC usually acquires its IP address from the local DHCP. If there is no DHCP present please read Appendix A: How to set up a static
IP. A description how to set the device IP can be found in the BatFlex FPGA Card Menu Guide.
PC
User
1.2. Direct Connection
Please read Appendix A: How to set up a static IP for further instructions.
PC
User
2. Hardware Installation
2.1. BatFlex
Connect a power cord to the device.
Connect the BatFlex with a RJ-45 cable to the desired network.
Connect the Computer to the same network as the BatFlex.
Turn the BatFlex device on, using the main switch on the front side.
The device is now ready to communicate with the PC.
Astrol Electronic AG reserves the right to change specifications without notice
Bat FLEX Manual
Ethernet
3/19
AD-10069-007 Rev. 03