Astrol Electronic BAT-FLEX 매뉴얼 - 페이지 3

{카테고리_이름} Astrol Electronic BAT-FLEX에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astrol Electronic BAT-FLEX 19 페이지.

페이지 인쇄
Astrol Electronic BAT-FLEX 매뉴얼

1. Connection Drawing

1.1. Connection over Network

The PC usually acquires its IP address from the local DHCP. If there is no DHCP present please read Appendix A: How to set up a static
IP. A description how to set the device IP can be found in the BatFlex FPGA Card Menu Guide.
PC
User

1.2. Direct Connection

Please read Appendix A: How to set up a static IP for further instructions.
PC
User

2. Hardware Installation

2.1. BatFlex

Connect a power cord to the device.
Connect the BatFlex with a RJ-45 cable to the desired network.
Connect the Computer to the same network as the BatFlex.
Turn the BatFlex device on, using the main switch on the front side.
The device is now ready to communicate with the PC.
Astrol Electronic AG reserves the right to change specifications without notice
Bat FLEX Manual
Ethernet
3/19
AD-10069-007 Rev. 03