Coldair GFP215 Betriebsanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Heizgerät Coldair GFP215 herunter. Coldair GFP215 16 Seiten. Fibre panel heater with wifi

Seite drucken

Wall Mounting & Position Instructions cont.

NOTE: Your Panel Heater should be installed with at least 300mm

clearance from the floor and any other surrounding parts including

other appliances, side walls, ceilings, shelves and soft furnishings.

1. Mark the positions of the four holes to be drilled on the wall. Ensure there

is a 300mm clearance on all sides of the heater.

2. Drill holes with an appropriate drill bit for the wall surface you are

mounting the heater on to.

3. Insert the plastic wall plugs into the holes.

4. Install the panel heater onto the 4 wall plugs matching the 4 holes on the

heater.

5. Screw the 4 screws into the plastic wall plugs.

6. Put the caps onto the end of the screws. It is recommended to use some

normal glue to stick the caps onto the screw heads.

To remove the unit from the wall, simply remove the screw caps, unscrew the

screws and take the heater down.