Coldair GFP215 사용 설명서 - 페이지 7

{카테고리_이름} Coldair GFP215에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Coldair GFP215 16 페이지. Fibre panel heater with wifi

Wall Mounting & Position Instructions cont.

NOTE: Your Panel Heater should be installed with at least 300mm

clearance from the floor and any other surrounding parts including

other appliances, side walls, ceilings, shelves and soft furnishings.

1. Mark the positions of the four holes to be drilled on the wall. Ensure there

is a 300mm clearance on all sides of the heater.

2. Drill holes with an appropriate drill bit for the wall surface you are

mounting the heater on to.

3. Insert the plastic wall plugs into the holes.

4. Install the panel heater onto the 4 wall plugs matching the 4 holes on the

heater.

5. Screw the 4 screws into the plastic wall plugs.

6. Put the caps onto the end of the screws. It is recommended to use some

normal glue to stick the caps onto the screw heads.

To remove the unit from the wall, simply remove the screw caps, unscrew the

screws and take the heater down.