coldline ICE550M-HA Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Eiswürfelbereiter coldline ICE550M-HA herunter. coldline ICE550M-HA 13 Seiten.

Seite drucken

The fault code and its comments are displayed as follows:



Code

Comments

E01

Sliding board fails

Overtime of ice

E03

making

E04

High temperature

E05

Water shortage

E06

High pressure

Parameters on the Control Panel

Please kindly note: "Ice Thickness +" (here after we say "+") is the first

buttonto press if you wanna restore the original parameters; However, "Ice

Thickness -" (here after we say "-") is the first button to press if you want to

adjust the ice thickness.

Restore The Original Parameters

Generally the original parameters is not allowed to be changed, but if customers

change the numbers carelessly, please process the following steps to solve it:

 Firstly check the display numbers as per our correct original numbers , for example

model SK-500P: "220, 308 ,405, 501, 640, 708, 820, 901". If it is not same, we

needto adjust the display numbers until it is same with the correct.

 Here we take SK-500P as example. Adjustment operation: press"+" button, if the

first number is 220, then press "+", come to display number 308, if it is not 308, now

you need to press "-" to check whether it is 308, if it display the correct number 308,

then we press "+" again" to come to 4-serial number, the next steps are same, just

repeat ituntil all numbers are correct.

NOTE: Next time do not press"+" directly, because this may

change the originalparameters.

、

Machine action

Protective

shutdown

Protective

shutdown

Protective

shutdown

Protective

shutdown

Protective

Original Parameters Display

USRESTAURANT® RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE

Condensation

E07

sensor open circuit

Condensation

E08

sensor short circuit

Water temp.

E09

sensor open circuit

Water temp.

E10

sensor short circuit

"+-" buttons

shutdown

Not stop