Asus A7V-VM Benutzerhandbuch - Seite 17
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Hauptplatine Asus A7V-VM herunter. Asus A7V-VM 23 Seiten. Athlon/duron microatx motherboard
Auch für Asus A7V-VM: Schnellstart-Handbuch (22 seiten)
Seite drucken
- 1. Specifications
- 2. Hardware Setup
- 3. Layout Contents
- 4. Hardware Setup Procedure
- 5. Motherboard Settings
- 6. System Memory (DIMM)
- 7. General DIMM Notes
- 8. DIMM Memory Installation
- 9. Central Processing Unit (CPU)
- 10. Expansion Card Installation Procedure
- 11. Expansion Cards
- 12. Assigning Irqs for Expansion Cards
- 13. Standard Interrupt Assignments
- 14. Interrupt Request Table for this Motherboard
- 15. Accelerated Graphics Port
- 16. External Connectors
2. HARDWARE SETUP
10) Power Supply, CPU, and Chassis Fan Connectors
(3-pin PS_FAN, CPU_FAN, DOCT_FAN)
These connectors support cooling fans of 350mA (4.2 Watts) or less. Orientate
the fans so that the heat sink fins allow airflow to go across the onboard heat
sink(s) instead of the expansion slots. Depending on the fan manufacturer, the
wiring and plug may be different. The red wire should be positive, while the
black should be ground. Connect the fan's plug to the board taking into consid-
eration the polarity of the connector.
WARNING!
The CPU and/or motherboard will overheat if there is no airflow
across the CPU and onboard heatsinks. Damage may occur to the motherboard
and/or the CPU fan if these pins are incorrectly used. These are not jumpers,
do not place jumper caps over these pins.
A7V-VM
A7V-VM 12-Volt Cooling Fan Power
ASUS A7V-VM User's Manual
CPU_FAN
GND
PS_FAN
FAN_SUS#
GND
GND
DOCT_FAN
+12V
Rotation
17