Dorex DX2 FW Installationsanleitung Handbuch - Seite 13

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Türöffnungssystem Dorex DX2 FW herunter. Dorex DX2 FW 16 Seiten.

INSTALL FIRE BOLT

NOTE: Fire rated exit device with Less Bottom Rod (LBR) application must use a FIRE BOLT

3 ³/4" minimum

NOTES:

1. Prepare door edge as indicated for the Fire Bolt. Position Fire Bolt 4" to 6" above the finished floor

2. Drill 1" hole in the door edge as indicated and drill and tap for #8-32 machine screws

3. Install Fire Bolt on edge of door and fasten with supplied screws

4. Mark the plug hole on the frame in line with the fire bolt. Drill 1" diameter hole x 1³⁄4" deep on frame or

inactive door edge at same height as the Fire bolt and install strike hole plug

x 3³⁄8" (85 mm) Deep

4"-6"

13 / 16

Recess required if gap between door

and frame is less than 1/8" (3 mm).

#8-32 TAP

Auxiliary Fire Bolt

DXAFL

1" (25.4 mm) Hole

Strike

Hole

Plug