bolid IPR 513-3M Konventionelles Handbuch - Seite 9
Blättern Sie online oder laden Sie pdf Konventionelles Handbuch für Sicherheitssystem bolid IPR 513-3M herunter. bolid IPR 513-3M 15 Seiten.
Auch für bolid IPR 513-3M: Gebrauchsanweisung (2 seiten)
Seite drucken
2.2.3 Mounting
The MCP is to be mounted to a flat vertical surface in
line with Buildings Codes and Regulations. The MCP rear
panel (base) is attached to the wall with two screws. The
front part of the housing is installed on the mounted base
after connecting wires to the terminal block. The wires that
pass under the rear panel should not be clamped by the MCP
housing.
Figure 2.2.3.1 shows the view of the MCP (without
the protective flip cover).
1: Hole to insert the key to reset the activated MCP;
2: Holes to insert the key to open the MCP housing;
3: Special key to reset the activated MCP / to open its housing;
4: Place to apply a seal.
9
Figure 2.2.2.2 Mounting Dimensions for the MCP
Figure 2.2.3.1. Parts of the MCP