Canon LV-7225 - LCD Multimedia Projector XGA Funktionale Spezifikation - Seite 17
Blättern Sie online oder laden Sie pdf Funktionale Spezifikation für Projektor Canon LV-7225 - LCD Multimedia Projector XGA herunter. Canon LV-7225 - LCD Multimedia Projector XGA 42 Seiten. Multimedia projectors
Auch für Canon LV-7225 - LCD Multimedia Projector XGA: Funktionale Spezifikation (20 seiten), Spezifikationen (6 seiten)
Seite drucken
Expand Serial Command Functional Specification
8.5.5. CF_V-POS Command
Command
"CF_V-POS_%1" [CR]
"0000 – nnnn" ----------- Directly set Vertical Position setting value
%1
"UP" ---------------------- Vertical Position setting value +1
"DN" -------------------- Vertical Position setting value –1
Set Vertical Position PC signal.
(When it is in usual Power On state, this is valid)
Details
The value set by the command will not be saved to the Projector.
Therefore, when AC Power Off the Projector, the value will return to the original
setting. (For Standby mode, this value stays)
Acceptable
Response
Unacceptable
8.5.6. CF_DDOTS Command
Command
"CF_DDOTS_%1" [CR]
"0100 – nnnn" --------- Directly set Display Dots setting value
%1
"UP" ---------------------- Display Dots setting value +1
"DN" ---------------------- Display Dots setting value –1
Set Display Dots PC signal.
(When it is in usual Power On state, this is valid)
Details
The value set by the command will not be saved to the Projector.
Therefore, when AC Power Off the Projector, the value will return to the original
setting. (For Standby mode, this value stays)
Acceptable
Response
Unacceptable
8.5.7. CF_DLINE Command
Command
"CF_DLINE_%1" [CR]
"0100 – nnnn" --------- Directly set Display Line setting value
%1
"UP" ---------------------- Display Line setting value +1
"DN" ---------------------- Display Line setting value –1
Set Display Line PC signal.
(When it is in usual Power On state, this is valid)
Details
The value set by the command will not be saved to the Projector.
Therefore, when AC Power Off the Projector, the value will return to the original
setting. (For Standby mode, this value stays)
Acceptable
Response
Unacceptable
"nnnn" is maximum value. This is current Total Line
value - Display Line value.
"000" [CR]
"101" [CR] ---- Input is Video
"nnnn" is maximum value. This is current Total Dots value
– Horizontal Position value.
"000" [CR]
"101" [CR] ---- Input is Video
"nnnn" is maximum value. This is current Total Line value
– Vertical Position value.
"000" [CR]
"101" [CR] ---- Input is Video
Page 16 of 41