Canon LV-7225 - LCD Multimedia Projector XGA Specifiche funzionali - Pagina 17
Sfoglia online o scarica il pdf Specifiche funzionali per Proiettore Canon LV-7225 - LCD Multimedia Projector XGA. Canon LV-7225 - LCD Multimedia Projector XGA 42. Multimedia projectors
Anche per Canon LV-7225 - LCD Multimedia Projector XGA: Specifiche funzionali (20 pagine), Specifiche tecniche (6 pagine)
Stampa la pagina
Expand Serial Command Functional Specification
8.5.5. CF_V-POS Command
Command
"CF_V-POS_%1" [CR]
"0000 – nnnn" ----------- Directly set Vertical Position setting value
%1
"UP" ---------------------- Vertical Position setting value +1
"DN" -------------------- Vertical Position setting value –1
Set Vertical Position PC signal.
(When it is in usual Power On state, this is valid)
Details
The value set by the command will not be saved to the Projector.
Therefore, when AC Power Off the Projector, the value will return to the original
setting. (For Standby mode, this value stays)
Acceptable
Response
Unacceptable
8.5.6. CF_DDOTS Command
Command
"CF_DDOTS_%1" [CR]
"0100 – nnnn" --------- Directly set Display Dots setting value
%1
"UP" ---------------------- Display Dots setting value +1
"DN" ---------------------- Display Dots setting value –1
Set Display Dots PC signal.
(When it is in usual Power On state, this is valid)
Details
The value set by the command will not be saved to the Projector.
Therefore, when AC Power Off the Projector, the value will return to the original
setting. (For Standby mode, this value stays)
Acceptable
Response
Unacceptable
8.5.7. CF_DLINE Command
Command
"CF_DLINE_%1" [CR]
"0100 – nnnn" --------- Directly set Display Line setting value
%1
"UP" ---------------------- Display Line setting value +1
"DN" ---------------------- Display Line setting value –1
Set Display Line PC signal.
(When it is in usual Power On state, this is valid)
Details
The value set by the command will not be saved to the Projector.
Therefore, when AC Power Off the Projector, the value will return to the original
setting. (For Standby mode, this value stays)
Acceptable
Response
Unacceptable
"nnnn" is maximum value. This is current Total Line
value - Display Line value.
"000" [CR]
"101" [CR] ---- Input is Video
"nnnn" is maximum value. This is current Total Dots value
– Horizontal Position value.
"000" [CR]
"101" [CR] ---- Input is Video
"nnnn" is maximum value. This is current Total Line value
– Vertical Position value.
"000" [CR]
"101" [CR] ---- Input is Video
Page 16 of 41