Cansec SmartLock UltraLite Plus Installationshandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Installationshandbuch für IP-Zugangssteuerungen Cansec SmartLock UltraLite Plus herunter. Cansec SmartLock UltraLite Plus 16 Seiten.
Seite drucken
Board Layout
NOTE:
1. Only connect a power source to the indicated power pins or product damage will result.
2. The door contact input must be bypassed if not used. To bypass, connect a jumper wire
between the door contact input and Ground.
3. If the cable feed hole on the controller back-box is too small, drill a larger hole to
accommodate the cable.
4. The controller comes in polycarbonate housing, and should be installed in an accessible
location on the secure side of the door.
5. The housing is not waterproof.
®
SmartLock
UltraLite Plus
Installation Manual
Page 5 of 16
Oct 2013 • Rev. 1.6