Cansec SmartLock UltraLite Plus Руководство по установке - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке для IP-контроллеры доступа Cansec SmartLock UltraLite Plus. Cansec SmartLock UltraLite Plus 16 страниц.
Печатать страницу
Board Layout
NOTE:
1. Only connect a power source to the indicated power pins or product damage will result.
2. The door contact input must be bypassed if not used. To bypass, connect a jumper wire
between the door contact input and Ground.
3. If the cable feed hole on the controller back-box is too small, drill a larger hole to
accommodate the cable.
4. The controller comes in polycarbonate housing, and should be installed in an accessible
location on the secure side of the door.
5. The housing is not waterproof.
®
SmartLock
UltraLite Plus
Installation Manual
Page 5 of 16
Oct 2013 • Rev. 1.6