Cansec SmartLock UltraLite Plus Руководство по установке - Страница 3
Просмотреть онлайн или скачать pdf Руководство по установке для IP-контроллеры доступа Cansec SmartLock UltraLite Plus. Cansec SmartLock UltraLite Plus 16 страниц.
Печатать страницу
Introduction
SmartLock UltraLite Plus is an extremely simple, stand-alone access control system that
supports up to 2,000 users with a 1,000 record, time-stamped audit trail capacity. All
programming is done at the PC, using software which is simple, intuitive and supports
up to 255 UltraLite Plus controllers. When used with the CanProx One proximity
reader, the UltraLite Plus system becomes one of the most cost-effective stand-alone,
expandable systems on the market.
The SmartLock UltraLite Plus controller features a form "C" relay output for lock
control as well as inputs for a request-to-exit button and a door contact. If a door
contact input is connected, the controller will automatically relock the door once it re-
closes. In addition, an audible alert can be generated on the reader if the door is held
open longer than a specified time.
IMPORTANT: If no door contact is used, the door contact input must be shorted to
ground. Failure to do this will result in erratic operation.
IMPORTANT: In some jurisdictions the use of a UL-approved power supply
and connection to the fire alarm system for emergency release may be
required. Installers should contact the fire marshal office or local
authority having jurisdiction to verify the specific requirements. A building
permit may be required in some jurisdictions for the installation of maglocks.
NOTE: Tech Support will only be provided where product installation guidelines
have been followed.
®
SmartLock
UltraLite Plus
Installation Manual
Page 3 of 16
Oct 2013 • Rev. 1.6