Battery Fighter BCA1102S6WR Gebrauchsanweisung - Seite 4

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Batterieladegerät Battery Fighter BCA1102S6WR herunter. Battery Fighter BCA1102S6WR 8 Seiten. Intelligent battery charger for both 6v & 12v lead acid automotive batteries

Seite drucken

SELECTION FOR BATTERY TYPE

A.C. power is connected with the wall socket properly

Press MODE button for battery charge mode selection before you connect the charger to the battery terminals.

LED Signal

12V 1A

6V 1A

LIGHT INDICATION:

LED SIGNAL

POWER

MODE

6V 1A

12V 1A

REVERSE POLARITY

RECOVERY

FULLY CHARGE /

MAINTENANCE

BAD BATTERY

CHARGING

BCA1382S6WR - 140728

Explanation

Lead Acid charging

A.C. power is connected with the wall socket properly and self-test will be commenced, the

LEDs will be flashing in following sequence - Bad Battery LED -> 12V 1A LED -> Recovery

LED -> 6V 1A LED. After completed the self-test, it will enter into standby mode. Standby :

POWER LED is flashing ; Charging : POWER LED is glowing

Press the MODE button for the selection of charging program.

PB charging status : the charger is switched to 6V lead acid (Pb) battery charging mode with

maximum current 1A

PB charging status : the charger is switched to 12V lead acid (Pb) battery charging mode with

maximum current 1A

Battery is connected in reverse polarity, please check the battery connection(s) and correct

reverse polarity condition. ( Make sure Red to "+" and Black to "-")

Battery Recovery processes will commence if the charger detects any charge acceptance

problems. Recovery processes include: Battery Rescue Phase, Soft Start Phase, Pulse Mode

Phase and Recondition Phase. Once the Recovery processes are completed, normal charge

will commence immediately. Recovery function in effect for Lead Acid charging mode 12V 1A

only.

The charging process is completed and the battery is in maintenance mode, it can be

returned to service if necessary or left safely connected to the charger indefinitely.

Maintenance function in effect for Lead Acid charging mode – both 12V 1A & 6V 1A. The LED

will be flashing while approaching fully charged and glowing in fully charge or maintenance

stage

The battery is worn out or is possibly defective. Suggest replacing battery ASAP

Normal charge processes are commenced. The Charger is delivering constant current &

voltage to the battery. To charge large capacity batteries the charger may remain in this mode

for several hours or even days. The Charging LED is in RED when the battery capacity is less

Description

12V lead acid battery charge mode at 1A max.

6V lead acid battery charge mode at 1A max.

EXPLANATION