DoubleSight DS-27PS Handbuch zur Schnellinstallation - Seite 11

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Racks & Ständer DoubleSight DS-27PS herunter. DoubleSight DS-27PS 12 Seiten. Full motion single monitor arm, pole mount

Seite drucken

INSTALLATION

Adjusting your New LCD Arm to your preferences

Once your Monitor and LCD Arm are completely installed you may find it necessary to make adjustments to best suit your

needs.

Adjusting the Position on your Desk

1. Remove the Monitor and Arm from the Pole prior to relocating the Pole. Simply lift off the Monitor and Arm and set

aside on a level flat surface.

2. Loosen the Clamp and relocate the Pole to the new positon and tighten in place.

3. Reinstall the Monitor and Arm.

Adjusting the Monitor Height

1. Loosen the Collar and move Collar and Arm Assembly up/down to the desired position. (See Figure 16)

Figure 16

Adjusting the VESA Bracket Tension

1. Depending on the weight of your monitor and your preferences, you may find it necessary to adjust the tension of

the VESA Bracket. You can adjust the Forward/Backward Tilt of the Bracket, as well as, the Left/Right Swing of the

Monitor. Using the 6mm Hex Allen Wrench (5) you can adjust the bolts to the desired tension. (See Figure 17)

Figure 17

Model: DS-27PS