DoubleSight DS-27PS Manuel d'installation rapide - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} DoubleSight DS-27PS. DoubleSight DS-27PS 12 pages. Full motion single monitor arm, pole mount
Imprimer la pageINSTALLATION
Adjusting your New LCD Arm to your preferences
Once your Monitor and LCD Arm are completely installed you may find it necessary to make adjustments to best suit your
needs.
Adjusting the Position on your Desk
1. Remove the Monitor and Arm from the Pole prior to relocating the Pole. Simply lift off the Monitor and Arm and set
aside on a level flat surface.
2. Loosen the Clamp and relocate the Pole to the new positon and tighten in place.
3. Reinstall the Monitor and Arm.
Adjusting the Monitor Height
1. Loosen the Collar and move Collar and Arm Assembly up/down to the desired position. (See Figure 16)
Figure 16
Adjusting the VESA Bracket Tension
1. Depending on the weight of your monitor and your preferences, you may find it necessary to adjust the tension of
the VESA Bracket. You can adjust the Forward/Backward Tilt of the Bracket, as well as, the Left/Right Swing of the
Monitor. Using the 6mm Hex Allen Wrench (5) you can adjust the bolts to the desired tension. (See Figure 17)
Figure 17
Model: DS-27PS