Doug Fleenor Design Preset12 Benutzerhandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kontrolleinheit Doug Fleenor Design Preset12 herunter. Doug Fleenor Design Preset12 11 Seiten.
PRODUCT DESCRIPTION
Preset12 is a lighting control station that uses the DMX512 control protocol to capture and play
back up to twelve static looks. Looks are recorded by capturing the output of any DMX512
controller. When external DMX512 control is not present, the looks are recalled by pressing one
of Preset12's buttons. When the DMX512 control signal is being generated by a source other
than Preset12, Preset12 goes offline and allows the other source to control the lights.
Multiple Preset12s may be connected together with one station acting as a main station (it holds
the recorded looks) and the others remotely controlling it. Preset12 requires 7 to 18 Volts DC or
10 to 12 Volts AC (typically provided by a 10V class 2 "doorbell" transformer). An inline adapter
is available to run Preset12 off of 24 VDC.
Preset12 is the size of a single-wide (North American) switch plate: 2.75 x 4.5 inches. Preset12
is unique in that the entire unit is only 0.3 inches deep, allowing the unit to be surface mounted
(no back box required), or mounted using shallow boxes or rings. Preset12 may also be
mounted to solid surfaces with surface wiring to the bottom connector.
Preset12 is IP68 rated. It features a polycarbonate (Lexan) faceplate with membrane switches.
The electronics are cast in epoxy. Connections are via five six-inch flying leads protruding out
the back (bottom wiring is optional).
Page 2 of 11