Doug Fleenor Design Preset12 소유자 매뉴얼 - 페이지 2

{카테고리_이름} Doug Fleenor Design Preset12에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Doug Fleenor Design Preset12 11 페이지.

PRODUCT DESCRIPTION

Preset12 is a lighting control station that uses the DMX512 control protocol to capture and play

back up to twelve static looks. Looks are recorded by capturing the output of any DMX512

controller. When external DMX512 control is not present, the looks are recalled by pressing one

of Preset12's buttons. When the DMX512 control signal is being generated by a source other

than Preset12, Preset12 goes offline and allows the other source to control the lights.

Multiple Preset12s may be connected together with one station acting as a main station (it holds

the recorded looks) and the others remotely controlling it. Preset12 requires 7 to 18 Volts DC or

10 to 12 Volts AC (typically provided by a 10V class 2 "doorbell" transformer). An inline adapter

is available to run Preset12 off of 24 VDC.

Preset12 is the size of a single-wide (North American) switch plate: 2.75 x 4.5 inches. Preset12

is unique in that the entire unit is only 0.3 inches deep, allowing the unit to be surface mounted

(no back box required), or mounted using shallow boxes or rings. Preset12 may also be

mounted to solid surfaces with surface wiring to the bottom connector.

Preset12 is IP68 rated. It features a polycarbonate (Lexan) faceplate with membrane switches.

The electronics are cast in epoxy. Connections are via five six-inch flying leads protruding out

the back (bottom wiring is optional).

Page 2 of 11