Douglas GCW-1 Betriebshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Industrielle Ausrüstung Douglas GCW-1 herunter. Douglas GCW-1 18 Seiten. Water washing machine

Seite drucken
the thermostat marked WASH to 150 degrees, now increase the thermostat marked RINSE
to 190 degrees. Allow 30 to 60 minutes for heat up time. Note: There can be as much as 12
to 15 degrees various between the thermostat and the temperature gauge. Always set the
thermostats to accommodate the desired temperature gauge reading.
At this point your heat source should be engaged. If electrically heated the wash and rinse
6
heater contactors will be engaged. If gas heated the burner or burners will fire. If steam
heated the steam solenoids will open. If you are not sure or if the specific heat source is not
on and the unit is not heating up, contact Douglas Machines for assistance.
Now that every thing is working fine. It's time to put the electrical enclosure panel back on
6
the electrical enclosure and start washing.
DougMac.com
GCW-1
10