Douglas GCW-1 Kullanım Kılavuzu - Sayfa 10

Endüstriyel Ekipmanlar Douglas GCW-1 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Douglas GCW-1 18 sayfaları. Water washing machine

the thermostat marked WASH to 150 degrees, now increase the thermostat marked RINSE

to 190 degrees. Allow 30 to 60 minutes for heat up time. Note: There can be as much as 12

to 15 degrees various between the thermostat and the temperature gauge. Always set the

thermostats to accommodate the desired temperature gauge reading.

At this point your heat source should be engaged. If electrically heated the wash and rinse

heater contactors will be engaged. If gas heated the burner or burners will fire. If steam

heated the steam solenoids will open. If you are not sure or if the specific heat source is not

on and the unit is not heating up, contact Douglas Machines for assistance.

Now that every thing is working fine. It's time to put the electrical enclosure panel back on

the electrical enclosure and start washing.

DougMac.com

GCW-1